Copyright	Isaac Jones 2003-2005
License	BSD3
Maintainer	[email protected]
Portability	portable
Safe Haskell	None
Language	Haskell2010

Distribution.Simple.UserHooks

Description

This defines the API that Setup.hs scripts can use to customise the way the build works. This module just defines the UserHooks type. The predefined sets of hooks that implement the Simple, Make and Configure build systems are defined in Distribution.Simple. The UserHooks is a big record of functions. There are 3 for each action, a pre, post and the action itself. There are few other miscellaneous hooks, ones to extend the set of programs and preprocessors and one to override the function used to read the .cabal file.

This hooks type is widely agreed to not be the right solution. Partly this is because changes to it usually break custom Setup.hs files and yet many internal code changes do require changes to the hooks. For example we cannot pass any extra parameters to most of the functions that implement the various phases because it would involve changing the types of the corresponding hook. At some point it will have to be replaced.

Synopsis

data UserHooks = UserHooks {
- runTests :: Args -> Bool -> PackageDescription -> LocalBuildInfo -> IO ()
- readDesc :: IO (Maybe GenericPackageDescription)
- hookedPreProcessors :: [PPSuffixHandler]
- hookedPrograms :: [Program]
- preConf :: Args -> ConfigFlags -> IO HookedBuildInfo
- confHook :: (GenericPackageDescription, HookedBuildInfo) -> ConfigFlags -> IO LocalBuildInfo
- postConf :: Args -> ConfigFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preBuild :: Args -> BuildFlags -> IO HookedBuildInfo
- buildHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> BuildFlags -> IO ()
- postBuild :: Args -> BuildFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preRepl :: Args -> ReplFlags -> IO HookedBuildInfo
- replHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> ReplFlags -> [String] -> IO ()
- postRepl :: Args -> ReplFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preClean :: Args -> CleanFlags -> IO HookedBuildInfo
- cleanHook :: PackageDescription -> () -> UserHooks -> CleanFlags -> IO ()
- postClean :: Args -> CleanFlags -> PackageDescription -> () -> IO ()
- preCopy :: Args -> CopyFlags -> IO HookedBuildInfo
- copyHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> CopyFlags -> IO ()
- postCopy :: Args -> CopyFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preInst :: Args -> InstallFlags -> IO HookedBuildInfo
- instHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> InstallFlags -> IO ()
- postInst :: Args -> InstallFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preSDist :: Args -> SDistFlags -> IO HookedBuildInfo
- sDistHook :: PackageDescription -> Maybe LocalBuildInfo -> UserHooks -> SDistFlags -> IO ()
- postSDist :: Args -> SDistFlags -> PackageDescription -> Maybe LocalBuildInfo -> IO ()
- preReg :: Args -> RegisterFlags -> IO HookedBuildInfo
- regHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> RegisterFlags -> IO ()
- postReg :: Args -> RegisterFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preUnreg :: Args -> RegisterFlags -> IO HookedBuildInfo
- unregHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> RegisterFlags -> IO ()
- postUnreg :: Args -> RegisterFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preHscolour :: Args -> HscolourFlags -> IO HookedBuildInfo
- hscolourHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> HscolourFlags -> IO ()
- postHscolour :: Args -> HscolourFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preDoctest :: Args -> DoctestFlags -> IO HookedBuildInfo
- doctestHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> DoctestFlags -> IO ()
- postDoctest :: Args -> DoctestFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preHaddock :: Args -> HaddockFlags -> IO HookedBuildInfo
- haddockHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> HaddockFlags -> IO ()
- postHaddock :: Args -> HaddockFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preTest :: Args -> TestFlags -> IO HookedBuildInfo
- testHook :: Args -> PackageDescription -> LocalBuildInfo -> UserHooks -> TestFlags -> IO ()
- postTest :: Args -> TestFlags -> PackageDescription -> LocalBuildInfo -> IO ()
- preBench :: Args -> BenchmarkFlags -> IO HookedBuildInfo
- benchHook :: Args -> PackageDescription -> LocalBuildInfo -> UserHooks -> BenchmarkFlags -> IO ()
- postBench :: Args -> BenchmarkFlags -> PackageDescription -> LocalBuildInfo -> IO ()
}
type Args = [String]
emptyUserHooks :: UserHooks

Documentation

data UserHooks Source #

Hooks allow authors to add specific functionality before and after a command is run, and also to specify additional preprocessors.

WARNING: The hooks interface is under rather constant flux as we try to understand users needs. Setup files that depend on this interface may break in future releases.

Constructors

UserHooks

Fields

runTests :: Args -> Bool -> PackageDescription -> LocalBuildInfo -> IO ()
Deprecated: Please use the new testing interface instead!
Used for ./setup test
readDesc :: IO (Maybe GenericPackageDescription)
Read the description file
hookedPreProcessors :: [PPSuffixHandler]
Custom preprocessors in addition to and overriding knownSuffixHandlers.
hookedPrograms :: [Program]
These programs are detected at configure time. Arguments for them are added to the configure command.
preConf :: Args -> ConfigFlags -> IO HookedBuildInfo
Hook to run before configure command
confHook :: (GenericPackageDescription, HookedBuildInfo) -> ConfigFlags -> IO LocalBuildInfo
Over-ride this hook to get different behavior during configure.
postConf :: Args -> ConfigFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after configure command
preBuild :: Args -> BuildFlags -> IO HookedBuildInfo
Hook to run before build command. Second arg indicates verbosity level.
buildHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> BuildFlags -> IO ()
Over-ride this hook to get different behavior during build.
postBuild :: Args -> BuildFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after build command. Second arg indicates verbosity level.
preRepl :: Args -> ReplFlags -> IO HookedBuildInfo
Hook to run before repl command. Second arg indicates verbosity level.
replHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> ReplFlags -> [String] -> IO ()
Over-ride this hook to get different behavior during interpretation.
postRepl :: Args -> ReplFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after repl command. Second arg indicates verbosity level.
preClean :: Args -> CleanFlags -> IO HookedBuildInfo
Hook to run before clean command. Second arg indicates verbosity level.
cleanHook :: PackageDescription -> () -> UserHooks -> CleanFlags -> IO ()
Over-ride this hook to get different behavior during clean.
postClean :: Args -> CleanFlags -> PackageDescription -> () -> IO ()
Hook to run after clean command. Second arg indicates verbosity level.
preCopy :: Args -> CopyFlags -> IO HookedBuildInfo
Hook to run before copy command
copyHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> CopyFlags -> IO ()
Over-ride this hook to get different behavior during copy.
postCopy :: Args -> CopyFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after copy command
preInst :: Args -> InstallFlags -> IO HookedBuildInfo
Hook to run before install command
instHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> InstallFlags -> IO ()
Over-ride this hook to get different behavior during install.
postInst :: Args -> InstallFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after install command. postInst should be run on the target, not on the build machine.
preSDist :: Args -> SDistFlags -> IO HookedBuildInfo
Hook to run before sdist command. Second arg indicates verbosity level.
sDistHook :: PackageDescription -> Maybe LocalBuildInfo -> UserHooks -> SDistFlags -> IO ()
Over-ride this hook to get different behavior during sdist.
postSDist :: Args -> SDistFlags -> PackageDescription -> Maybe LocalBuildInfo -> IO ()
Hook to run after sdist command. Second arg indicates verbosity level.
preReg :: Args -> RegisterFlags -> IO HookedBuildInfo
Hook to run before register command
regHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> RegisterFlags -> IO ()
Over-ride this hook to get different behavior during registration.
postReg :: Args -> RegisterFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after register command
preUnreg :: Args -> RegisterFlags -> IO HookedBuildInfo
Hook to run before unregister command
unregHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> RegisterFlags -> IO ()
Over-ride this hook to get different behavior during unregistration.
postUnreg :: Args -> RegisterFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after unregister command
preHscolour :: Args -> HscolourFlags -> IO HookedBuildInfo
Hook to run before hscolour command. Second arg indicates verbosity level.
hscolourHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> HscolourFlags -> IO ()
Over-ride this hook to get different behavior during hscolour.
postHscolour :: Args -> HscolourFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after hscolour command. Second arg indicates verbosity level.
preDoctest :: Args -> DoctestFlags -> IO HookedBuildInfo
Hook to run before doctest command. Second arg indicates verbosity level.
doctestHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> DoctestFlags -> IO ()
Over-ride this hook to get different behavior during doctest.
postDoctest :: Args -> DoctestFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after doctest command. Second arg indicates verbosity level.
preHaddock :: Args -> HaddockFlags -> IO HookedBuildInfo
Hook to run before haddock command. Second arg indicates verbosity level.
haddockHook :: PackageDescription -> LocalBuildInfo -> UserHooks -> HaddockFlags -> IO ()
Over-ride this hook to get different behavior during haddock.
postHaddock :: Args -> HaddockFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after haddock command. Second arg indicates verbosity level.
preTest :: Args -> TestFlags -> IO HookedBuildInfo
Hook to run before test command.
testHook :: Args -> PackageDescription -> LocalBuildInfo -> UserHooks -> TestFlags -> IO ()
Over-ride this hook to get different behavior during test.
postTest :: Args -> TestFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after test command.
preBench :: Args -> BenchmarkFlags -> IO HookedBuildInfo
Hook to run before bench command.
benchHook :: Args -> PackageDescription -> LocalBuildInfo -> UserHooks -> BenchmarkFlags -> IO ()
Over-ride this hook to get different behavior during bench.
postBench :: Args -> BenchmarkFlags -> PackageDescription -> LocalBuildInfo -> IO ()
Hook to run after bench command.

type Args = [String] Source #

emptyUserHooks :: UserHooks Source #

Empty UserHooks which do nothing.